Mobile ARMOR BALLISTIC Shields

Then
One Hundred Years Ago, in World War I
Combat forces needed a large, heavy mobile armor shield to stop bullets. Back then, the state of the art design was a steel box that weighed thousands of pounds, required two horses to transport, and five large men and a boy to roll it into place. While hardly fitting the definition of mobile, the station provided limited protection against small caliber weapons, thus barely fitting the definition of mobile ballistic armor.

Now
STRONGPOINT, MOBILE BALLISTIC SECURITY SHIELDS
Personal protection and mobility are just as important today as they have ever been for both the military and domestic law enforcement. Designed with our brave soldiers and policemen in mind, CMI has developed a family of mobile ballistic security shields, using ballistic armor steel, that will provide protection where it is needed, easily, quickly and economically. There are two versions of this mobile system; one will provide protection against NIJ Level IV threats, the other lighter unit against NIJ Level III. Each unit is able to be towed behind a light duty car or truck. Due to its patent pending design our Ballistic Mobile Transforming Shield (BMTS) that takes advantage of gravity and balance; the station can be assembled and set up in a matter of seconds and maneuvered into place by a single operator without tools. The Mobile Security Shield may be pushed forward , backwards, or sideways and will fit easily through a 30-inch door opening. Each version (MST4) – Level IV and (MST3) Level III – are available in a number of sizes with a range of options including gun ports, lighting and storage.
STRONGPOINT, MOBILE BALLISTIC SECURITY SHIELDS
Personal protection and mobility are just as important today as they have ever been for both the military and domestic law enforcement. Designed with our brave soldiers and policemen in mind, CMI has developed a family of mobile ballistic security shields, using ballistic armor steel, that will provide protection where it is needed, easily, quickly and economically. There are two versions of this mobile system; one will provide protection against NIJ Level IV threats, the other lighter unit against NIJ Level III. Each unit is able to be towed behind a light duty car or truck. Due to its patent pending design our Ballistic Mobile Transforming Shield (BMTS) that takes advantage of gravity and balance; the station can be assembled and set up in a matter of seconds and maneuvered into place by a single operator without tools. The Mobile Security Shield may be pushed forward , backwards, or sideways and will fit easily through a 30-inch door opening. Each version (MST4) – Level IV and (MST3) Level III – are available in a number of sizes with a range of options including gun ports, lighting and storage.
Specifications and Characteristics for level III and level IV Mobile Ballistic protection shields
Shields provide head to toe protection from straight-on and partial overhead and side protection at up to 60 degrees.
Shields have replaceable transparent armor (laminated ballistic glass) that can be replaced with a standard 9/16 wrench.
Transparent armor is frame encased and its edges are overlapped by armor steel for extra gap protection.
Ballistic glass provides a minimum of NIJ level 3 protection for level 3 shield and NIJ level 4 for the level 4 shield. Window view- able area ranges from 4 to 6 sq. ft., depending on unit size.
Steel Armor plate (6mm) is rated at NIJ level 3 and covers over 32 sq. ft. (full 2 man protection area) All critical welded areas are double layered for extra protection and exceed NIJ level 3 minimums. Armor steel for NIJ level 4 is 6mm. thick.
Shields range from 36” inches wide up to 60” depending on model. Standard height is 75” and an additional 24” overhead plate can be added.
Wheels and Casters are available in standard hard rubber 8 inch or in 10 inch all terrain no flat design.
Travel wheels are mounted with pneumatic highway tires and can be attached inboard or outboard of the shield.
Mutable shields can be connected together to provide up to 360 degrees of protection.
Shields can be quickly prevented from rolling by raising front wheels into a lock down position.
Sliding gun-port between windows is an option that can be added to units 44 inches or wider.
Shields are 2 stage powder coated first using zinc rich primer to prevent rust and corrosion and using a top coat in black or tan or any customer’s color preference.
Patented mobile shield design has built-in vehicle tow capability using any 2” hitch. It takes only one man a couple minutes to transition the shield from transport stage to protection shield.
Shields are built with optional solid ATV tires to ease roll-ability on unimproved surfaces and can be locked in place when on inclines.
Shields are designed to work in hot, cold and damp environments.
Shields have a mass weight in excess of 700 pounds to protect from blast and secondary fragmentation pressure.
All steel and ballistic glass is certified by an independent recognized ballistic testing facility.
Optional equipment: ballistic awnings, heaters, spot lights, gun ports, multi-shield connecting plates, shelves, drawers and signage.
Shields provide head to toe protection from straight-on and partial overhead and side protection at up to 60 degrees.
Shields have replaceable transparent armor (laminated ballistic glass) that can be replaced with a standard 9/16 wrench.
Transparent armor is frame encased and its edges are overlapped by armor steel for extra gap protection.
Ballistic glass provides a minimum of NIJ level 3 protection for level 3 shield and NIJ level 4 for the level 4 shield. Window view- able area ranges from 4 to 6 sq. ft., depending on unit size.
Steel Armor plate (6mm) is rated at NIJ level 3 and covers over 32 sq. ft. (full 2 man protection area) All critical welded areas are double layered for extra protection and exceed NIJ level 3 minimums. Armor steel for NIJ level 4 is 6mm. thick.
Shields range from 36” inches wide up to 60” depending on model. Standard height is 75” and an additional 24” overhead plate can be added.
Wheels and Casters are available in standard hard rubber 8 inch or in 10 inch all terrain no flat design.
Travel wheels are mounted with pneumatic highway tires and can be attached inboard or outboard of the shield.
Mutable shields can be connected together to provide up to 360 degrees of protection.
Shields can be quickly prevented from rolling by raising front wheels into a lock down position.
Sliding gun-port between windows is an option that can be added to units 44 inches or wider.
Shields are 2 stage powder coated first using zinc rich primer to prevent rust and corrosion and using a top coat in black or tan or any customer’s color preference.
Patented mobile shield design has built-in vehicle tow capability using any 2” hitch. It takes only one man a couple minutes to transition the shield from transport stage to protection shield.
Shields are built with optional solid ATV tires to ease roll-ability on unimproved surfaces and can be locked in place when on inclines.
Shields are designed to work in hot, cold and damp environments.
Shields have a mass weight in excess of 700 pounds to protect from blast and secondary fragmentation pressure.
All steel and ballistic glass is certified by an independent recognized ballistic testing facility.
Optional equipment: ballistic awnings, heaters, spot lights, gun ports, multi-shield connecting plates, shelves, drawers and signage.
Purchasing a Mobile BALLISTIC Shield
Ballistic Mobile Shields are something you hope your department will never have to use outside of a training exercise. But if there is an incident, you will need the protection to keep your people safe and provide rescue for those at risk. CMI can help, our shields were originally developed for the military and can be found on bases throughout the country. But, due to budget restraints, large numbers of Police, Sheriff and Security departments find it hard to justify this type of protection. We now have a leasing program for Municipalities. Your department can have the protection it requires at a small monthly payment. Contact us to see the type of protection you can provide for your department for a couple of hundred dollars a month.
NATIONWIDE STRUCTURES INC and CEI are the exclusive distributors for our Mobile Shields
|
SINGLE MAN MOBILE BaLLISTIC SHIELD![]() Our (LE3) has been designed to be a light mobile unit that one man can maneuver into any position. It can be pulled up a set of stairs, roll through a 30" door opening, provide protection when going around corners and light up a dark area. This unit, made from ballistic armor steel, provides NIJ level III protection with great deal of versatility. This station is easily transportable using any class 3 hitch when purchased with larger solid filled ATV type tires. For detailed information in regards to specification,options and cost . click here |
Specifications and Characteristics for level III single man
Mobile Ballistic shield
Shields provide head to toe protection from straight-on and partial overhead and side protection at up to 40 degrees.
Shields have replaceable transparent armor (laminated ballistic glass) that can be replaced with a standard 9/16 wrench.
Transparent armor is frame encased and its edges are overlapped by armor steel for extra gap protection.
Ballistic glass provides a minimum of NIJ level 3 protection for level 3 shield. Window view- able area ranges from 1 to 2 sq. ft., depending on unit size.
Steel Armor plate (6mm) is rated at NIJ level 3 and covers over 15 sq. ft. All critical welded areas are double layered for extra
protection and exceed NIJ level 3 minimums.
Shields range from 30” inches wide up to 36” depending on model. Standard height is 75” .
Wheels and Casters are available in standard hard rubber 8 inch or in 10 inch all terrain no flat design.
Mutable shields can be connected together to provide up to 360 degrees of protection.
Shields are 2 stage powder coated first using zinc rich primer to prevent rust and corrosion and using a top coat in black or tan or any customer’s color preference..
Shields are designed to work in hot, cold and damp environments.
Shields weight between 180 and 200 pounds depending on options
Shields have an available option of a 2" hitch attachment so shield can be easily transported.
All steel and ballistic glass is certified by an independent recognized ballistic testing facility.
Optional equipment: spot lights,, multi-shield connecting plates, signage.
Mobile Ballistic shield
Shields provide head to toe protection from straight-on and partial overhead and side protection at up to 40 degrees.
Shields have replaceable transparent armor (laminated ballistic glass) that can be replaced with a standard 9/16 wrench.
Transparent armor is frame encased and its edges are overlapped by armor steel for extra gap protection.
Ballistic glass provides a minimum of NIJ level 3 protection for level 3 shield. Window view- able area ranges from 1 to 2 sq. ft., depending on unit size.
Steel Armor plate (6mm) is rated at NIJ level 3 and covers over 15 sq. ft. All critical welded areas are double layered for extra
protection and exceed NIJ level 3 minimums.
Shields range from 30” inches wide up to 36” depending on model. Standard height is 75” .
Wheels and Casters are available in standard hard rubber 8 inch or in 10 inch all terrain no flat design.
Mutable shields can be connected together to provide up to 360 degrees of protection.
Shields are 2 stage powder coated first using zinc rich primer to prevent rust and corrosion and using a top coat in black or tan or any customer’s color preference..
Shields are designed to work in hot, cold and damp environments.
Shields weight between 180 and 200 pounds depending on options
Shields have an available option of a 2" hitch attachment so shield can be easily transported.
All steel and ballistic glass is certified by an independent recognized ballistic testing facility.
Optional equipment: spot lights,, multi-shield connecting plates, signage.
TWO MAN,TRANSPORTABLE, BALLISTIC mobile shields

mst2_mobile_shield_user_manual_rev_b.pdf | |
File Size: | 1922 kb |
File Type: |

mst2-36_mobile_shield_user_manual_06202016.pdf | |
File Size: | 2175 kb |
File Type: |

mobile_shields_characteristics.pdf | |
File Size: | 197 kb |
File Type: |
STANDING STATION

When there is a need for defense using ballistic armor steel in an armor station that is semi-permanent, consider the STANDING STATION. This unit has no wheels but can easily be moved into position with a pallet jack or a lift. They are available in sizes ranging from three to five feet wide. With armor protection ranging from NIJ level III to level IV.
There are options available such as overhead awnings, drawers, heaters, powder coat paint, flood lights and even a gun port. The armor rated windows, range in size from 4 sq. ft. and up depending on the size of the unite.

ss-4_stationary_shield_user_manual_revised_lg.pdf | |
File Size: | 620 kb |
File Type: |